TW200 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
1995 tw200 2,500 miles. My bike ran fine but I replaced the left side cover gasket due to an oil leak. When I pulled the side cover the magneto was still attached to the cover. The starter gear assembly came apart.I reassembled everything and now the bike won't start. I am not getting any spark at the spark plug. Did I mess up the timing or what? Any suggestions would help. Thanks!
 

·
Registered
Joined
·
7,369 Posts
1995 tw200 2,500 miles. My bike ran fine but I replaced the left side cover gasket due to an oil leak. When I pulled the side cover the magneto was still attached to the cover. The starter gear assembly came apart.I reassembled everything and now the bike won't start. I am not getting any spark at the spark plug. Did I mess up the timing or what? Any suggestions would help. Thanks!


You may have pinched the pulse coil wires when you put the cover back on.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #3
You may have pinched the pulse coil wires when you put the cover back on.
That makes sense because I did have a little trouble getting everything matched up.Guess I will have to pull everything apart again. Thanks for the info. Art
 
1 - 3 of 3 Posts
Top