TW200 Forum banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2022 HERE!

oil cooler and engine oil capacity

2477 Views 9 Replies 6 Participants Last post by  old mad max
I was pondering the result of adding a .6 capacity quart oil cooler on my TW.. With the one quart stock oil capacity , would there be a problem of "flooding" the crankcase with an over fill of oil if the filter is above the engine and gravity takes it measure. If the system is sealed , I assume all is OK.. but with the crankcase breather , I wonder if the oil from the cooler would drain into the engine in places where it should not be...water seeks it own leval ~ maybe oil does...Thanks in advance..
1 - 1 of 10 Posts
I believe my oil 'cooler' tank carries an extra 8 oz. As Russ indicates, an inlet/outlet at the top prevents the oil draining/siphoning back into the crankcase. Gerry

See less See more
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.