TW200 Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
1,405 Posts
Discussion Starter #1 (Edited)
All, i'm taking this listing down for the time being. I'm dealing with some trying family issues right now that demand my full attention. once im thru this i will put up what i have left.

Thanks
 

·
Registered
Joined
·
1,598 Posts
Would you sell or trade one bolt?

Can you tell what's missing:). I posted in my thread I trade a paracord lanyard for one.
 

·
Registered
Joined
·
1,405 Posts
Discussion Starter #3
Would you sell or trade one bolt?

Can you tell what's missing:). I posted in my thread I trade a paracord lanyard for one.
I actually dont have any of those bolts available. They are holding the rear pegs to the frame still and because they are rusted in there a little im not intending to take them off. I would just get a bolt form your local hardware store( not HD or lowes). Any short M8 will do in standard thread and should cost ~ a buck.
 

·
Registered
Joined
·
1,598 Posts
Ok thanks.
I'm a little OCD, I'll change things and "remodel" but I still have to have the "correct" parts. I rode right to hardware and got a bolt. 37cents.

I believe another member has one for me.
I'm sad that a TW is gone:(, maybe others will live on.
 

·
Registered
Joined
·
814 Posts
I'll bump the thread to the top to make up for the off topic thread jack.

Padilen, Find a thread where someone is bragging about their CycleRack install and they should have two of the bolts that you need.
 

·
Registered
Joined
·
1,405 Posts
Discussion Starter #7
Will you sell the air-filter cover screws?
sorry, those are a part of the airbox assembly and without them it makes the airbox kind of useless. Im not going to break things up like that. especially since you can get those screws for cheap brand new from rocky mtn atv or boats.net.
 

·
Registered
Joined
·
470 Posts
especially since you can get those screws for cheap brand new from rocky mtn atv or boats.net.
I'd be interested in seeing a part number from either place, since you say they are cheap, I am assuming you've seen them listed.
 

·
Registered
Joined
·
1,405 Posts
Discussion Starter #10
you are talking about the screws that hold the cover on for the air filter correct? Check the pic below, part number 15, less than 2 bucks from rocky mountian.... Id bet a hardware store would have a suitable screw as well. My 06 had a couple fall out and i replaced them with just that, got a couple from a local hardware store.

2014-10-03_131647.jpg
2014-10-03_131228.jpg

as i said, i don't want to separate the parts of the airbox. its 100% complete as it sits.
 

·
Registered
Joined
·
470 Posts
you are talking about the screws that hold the cover on for the air filter correct? Check the pic below, part number 15, less than 2 bucks from rocky mountian.... Id bet a hardware store would have a suitable screw as well. My 06 had a couple fall out and i replaced them with just that, got a couple from a local hardware s
Thanks, I found them somewhere else before and the shipping is murder. I do order from Rocky Mountain sometimes, so I'll just add them next time to defray the shipping cost. Thanks for the info, I hadn't been able to find them there.
 

·
Registered
Joined
·
13 Posts
My hunting helper didn't put the seat bolts back in, and I arrived at my hunting spot Saturday with no seat on my bike. I couldn't see it in the trailer behind the camper. I really need a seat before next weekend. And, since I'm here, my front fender is wonky and I should replace it.

Please text me your prices for the seat and front fender, second day aired to 98625.
Thanks!
Mark
three six 0 356 two 6 3 nine.
 

·
Registered
Joined
·
1,405 Posts
Discussion Starter #14
Interested in your frame, wiring harness, and switch gear. How much shipped to 55350? Thanx
The harness and switchgear are in process of being sold now, need to update the listing. I'd like to get 200 for the frame, the shipping will be the killer. I have gotten quotes between 160 and 250 depending on where it's going. Ups is simply expensive on an item this big.


Sent from my iPad using Tapatalk
 

·
Registered
Joined
·
100 Posts
How much for key switch, gas cap and helmet lock? Also need complete rear fender assembly including turn signals? Shipping to Ca 92592.
Thanks
 
1 - 15 of 15 Posts
Top