TW200 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
49 Posts
Discussion Starter #1
Hi guys,

Good day! I pulled this Push Rod #1 from the clutch basket module by accident, is it OK if I just push it back into the hole it came off from?

This push rod #1 from the middle of the clutch assembly
IMG_20181129_115954.jpg

It is the part indicated here in the diagram (Blue arrow). Apparently there's a ball (red arrow) behind it. Should I be worried? Or can I just put the rod back?
pushrod01.jpg

Thanks in advance guys for responding.

Best regards,
Gunn
 

·
Registered
Joined
·
49 Posts
Discussion Starter #3
If you still have the ball bearing, just put it back together the way it came apart. If you don't have the ball bearing, you will need to get a replacement.
Thanks Brian. I just want to know if the ball would came off easily. I don't have the tool to pull open that part to inspect...
 
1 - 5 of 5 Posts
Top