TW200 Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter #1
When coming to a stop, if I use the engine to slow the Dub it returns to idle just fine, but if I chop throttle and pull clutch lever, it holds a high idle and returns slowly, worse in hot weather. I do not have the Haynes for the Dub. Suggestions?
 

·
Registered
Joined
·
136 Posts
Have you looked at the cables? They have two . One is a return.



you should have some free play on it. This is a small amount of play on your twist grip at the start that nothing happens. It shouldn't be tight. Kind of like turning it for 20thousands and nothing happens.
 

·
Registered
Joined
·
19 Posts
Discussion Starter #5
Have you looked at the cables? They have two . One is a return.



you should have some free play on it. This is a small amount of play on your twist grip at the start that nothing happens. It shouldn't be tight. Kind of like turning it for 20thousands and nothing happens.
 

·
Registered
Joined
·
136 Posts
adjust the cable nut on the carb end. Return tight and the one that pulls should be a little loose.
 
1 - 8 of 8 Posts
Top