TW200 Forum banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2022 HERE!

Rewiring the light switch

2204 Views 13 Replies 8 Participants Last post by  TW_in_BC
I've searched high and low here for info on how to rewire the headlight.

No success.



I want the light OFF when the switch is on LOW beam.

And I want the light on HIGH, when the switch is on HIGH beam.



Any help is appreciated.
1 - 2 of 14 Posts
On the older tws we just remove the switch and file the top of the opening re install switch. This allows you to move the switch one click higher, passing the contact point and turning the light off.
Thanks for the tip!
If you have a Pre-2001 TW (with the slider switch instead of the rocker-type switch) it's a 5 minute job to do this --



http://tw200forum.com/index.php?/to...-off/page__p__28869__fromsearch__1#entry28869
Hey Truelight, after the mod does it still click into low beam or do you find yourself turning the light off by accident when trying to dim them?
1 - 2 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top