TW200 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter #1
Hi Guys
I spent all day Saturday working on my TW. first changed the sprockets went to a 13 on front and a 55 rear. changed the shock spring to a red one from procycle, changed oil twice just because I pinched the wires when reassembling. I thought I was careful but I knew what I did when it did not start. thanks for the write ups on here. it was not to bad. got al that done put on the duro power grip 26x8x14. had rmatv mount it they did a fine job. and last a new X chain. I just wanted to thank every one on the forum for their knowledge that they are welling to share. the project went well only a coupe bad words Again.and I didn't have to do this :violent1:eek:r this :BangHead : only this blob1::Thanks Allen
 

·
Registered
Joined
·
1,510 Posts
You know you don't have to waste that oil every time you take the left case off. Just lean it over onto a short wood stool or some such thing and all the oil runs over to the other side. Thanks for the reminder about changing the oil though.;)
 
1 - 3 of 3 Posts
Top