TW200 Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter #1
Hello,

I have a 2019 Tdubs been running great. My speedometer is now jumping and bouncing around even when I stay at a constant speed. Oddly enough fully pinning it and holding full throttle brings it to 0mph. The only mods I have done were replaced the head light to a round light but I did that months ago. I checked the wiring and everything is in tact. Anyone else experienced this speedometer issue?


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
1,608 Posts
Pull the cable out of the back and inspect it. If it’s chowdered order a new one. If it looks ok, reinsert it and see if it is improved. You can also do the same to the bottom end of the cable.
 
  • Like
Reactions: PierreDelecto

·
Registered
Joined
·
37 Posts
Discussion Starter #3
Pull the cable out of the back and inspect it. If it’s chowdered order a new one. If it looks ok, reinsert it and see if it is improved. You can also do the same to the bottom end of the cable.
I’ll give that a go this evening thanks!


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
656 Posts
I suggest white lithium grease except not the last few inches before the speedometer.
 
1 - 6 of 6 Posts
Top