TW200 Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
2,132 Posts




I've never used Flickr, but ordinarily there's a place somewhere that you can get the address (url) when you are looking at your pictures online. Sometimes you hold down the control or option key while having the cursor over the picture. Anyway, from what you had I extracted the address of one picture http://farm8.staticflickr.com/7181/7015524847_579921f6d5.jpg hit the insert image button on the message posting panel, deleted the http:// already there, inserted the address of your picture, and it came up. I tried playing with the other part of what you had http://www.flickr.com/photos/[email protected]/7015524847.jpg to see if I could make it work, but no luck. It's going to be looking to see that it's an url, so it has to have http:// at the beginning, and it will be looking to see that it's a picture so the address should have .jpg or some other picture format at the end. Anyway, keep trying and you'll figure it out.
 

·
Registered
Joined
·
2,093 Posts
I use flickr from the iphone. I just send my pics to flickr, then go to the flickr site and pic your pic, then go to action, then to view all sizes, then click on the bigger of the two medium sizes. Once thats done click on the pic until it says "save image or copy" click copy. Then go back to your post reply and click the pic button then backspace "clear the http:" then hold your finger on the empty space and phone will say paste and click paste and thats it. It will come up with a bunch of numbe and letters but when you finish your post the pic will show up.
 

·
Registered
Joined
·
24 Posts
Discussion Starter #5
Thanks! I'll keep trying..







I use flickr from the iphone. I just send my pics to flickr, then go to the flickr site and pic your pic, then go to action, then to view all sizes, then click on the bigger of the two medium sizes. Once thats done click on the pic until it says "save image or copy" click copy. Then go back to your post reply and click the pic button then backspace "clear the http:" then hold your finger on the empty space and phone will say paste and click paste and thats it. It will come up with a bunch of numbe and letters but when you finish your post the pic will show up.
 

Attachments

·
Registered
Joined
·
1,533 Posts
Thanks! I'll keep trying..
Simple to post any photo from that Flikr site... pick the size you want (i.e. - Medium), go to that photo, right-click the photo, View Image Info (so you can see the URL, which must end in .jpg), copy that, come back to this site and use the Insert Image routine here to paste in that URL. Like this...



 
1 - 6 of 6 Posts
Top