TW200 Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
167 Posts
Discussion Starter #1
I'm wondering if someone successfully installed a Trail Tech Vector on his TW while keeping the stock indicator lights. I've seen one installed above the stock speedo, but I would like to replace it.



Pictures would be welcome




Thank you!
 

·
Registered
Joined
·
167 Posts
Discussion Starter #3
That's exactly what I wanted to see! Thank you ;-)



Do you have, by chance, a picture or a plan of the bracket you made?
 

·
Registered
Joined
·
1,066 Posts
So I removed the speedometer and used the same shape for the alum plate; just made it a 1/4" wider all around so it would sit on top of the rubber gasket. I used the same mounting holes the speedometer used to secure the plate and drilled one large hole in the plate to run all the wires through. I can try and take a picture of the underside tonight when I get home.



BTW-I'm in the middle of the xt225 tank addition based on your write up, thanks again,
 

·
Registered
Joined
·
134 Posts
.

I just put a Vapor on mine, but I also got the bracket with the lights that goes around the unit, as I wanted to place it in the center and eliminate the stock ones. Here is a poor picture, I'll try and get a better one tonight.









.
 

·
Registered
Joined
·
167 Posts
Discussion Starter #6
Thank you guys!



bikerjosh, don't remove anything, I'm sure I can figure how to install the thing with the info you gave me.



 
1 - 6 of 6 Posts
Top