TW200 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
I've seen one post on here about the Trail Tech Voyager GPS/Speedo. But I would like to get any more feed back about use-ablitly and installing on a TW.



Cheers.
 

·
Registered
Joined
·
7,369 Posts
Probably a bit spendy for a lot of this crowd and not really movable from bike-to-bike. But if I weren't already invested in my Garmin I'd give one a try. I've had their Vapor units on several bikes with nary a glitch though I've sometimes had to modify or uprade some of their hardware like the speedometer pickup mounts.



Here's a review. Probably several over in ADVrider and such.



http://www.dirtrider.com/tests/parts-accessories/141_1105_trail_tech_voyager_gps_review/
 

·
Registered
Joined
·
9 Posts
Discussion Starter #3
Good review. Yah I already have a garmin gps that does all the gps stuff that the voyager does.. this is just easier to use while riding I think. Plus it has the engine temp,rpm,speed. So it seems like a nice clean design to have on the bike.



Another question would be trying to get oil temp into the Voyager. Would be cool to be able to have a fitting on your oil cooler that you could screw in a oil temp sensor. I know they have the cylinder head temperature probe that comes with the voyager. Maybe have a external switch to go between the oil temp and cylinder temp (assuming they both are the same probe type).
 
1 - 3 of 3 Posts
Top