TW200 Forum banner

1 - 1 of 1 Posts

·
Super Moderator
Joined
·
18,141 Posts
Discussion Starter #1 (Edited)





CAUTION!! VERY IMPORTANT!!

Please note that it has been discovered that the torque values here in the shop manual for the Oil Filter Cover are wrong.

Many members have snapped off the bolt using the 7.2 ft.lb reference.

USE the same values as the screws.

USE 5.1 ft.lbs (61 inch.lbs) for the bolt as well as the screws!!
 
1 - 1 of 1 Posts
Top