TW200 Forum banner

1 - 17 of 17 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
Hi Everyone,



I haven't been around the forum in a long time, but now I need a late model, 2012/2013 TW200 to do a test fit of some of my products.



Would need the bike for a couple of days and will trade some of our products for the use of the bike.



Please contact me for more info if you are in the So CA area and interested.



Tom Miller Pres TCI Products 714-639-4933
 

·
Registered
Joined
·
701 Posts
You know, judging by what TCI has turned out in the past, I have a feeling this is gonna turn out awesome.. again.




EDIT: Wish I was anywhere close!
 

·
Registered
Joined
·
7,369 Posts
Jump on this. I've worked with Tom in the past. Your bike will be in the best of hands and the goodies will be the "goodest".
 

·
Registered
Joined
·
701 Posts
You know guys, it says a lot of good things about a vendor who will come search out the die-hard folks who use a forum like this to test fit their products and give honest feedback. +1 to Tom @ TCI!
 

·
Registered
Joined
·
493 Posts
There must be some SO Cal folks around to help out. This is great news for sure. Thanks for supporting the TW.
 

·
Registered
Joined
·
10 Posts
Discussion Starter #10
Hi,



I have had a customer with a 2013 model have difficulty installing one of our racks. From all the part number sources on line- the tail section parts are the same- I would like to confirm this on a new bike. It would also work if someone with a 2013 model and already installed one of our racks- confirm that it fits or not. We did change the way we build and mount the racks for the TW, but the changes were done on a bike- so everything should be good.



Thanks Tom
 

·
Registered
Joined
·
1,826 Posts
Is it just the colors of the 12/13 models you are looking at???????? If it's just a dub to make sure your parts will fit then all dubs past 01 should work for the test fits... OMM.
 

·
Registered
Joined
·
7,369 Posts
Tom's had a customer who's had an issue.



Yamaha has already monkeyed with the "they're all the same" thing in the past (exhaust mounting tab location, etc.)



If you have one of these new bikes by all means please help him out.
 

·
Registered
Joined
·
10 Posts
Discussion Starter #14
Hi,



All of the parts listings that I can find show the 2012/2013 to use the same part numbers as the earlier model in the tail/ seat section. The customer has sent me pictures of his 2013 bike and there is clearly a fitment problem. I need to determine if it is a change in the bike, or an installation error.



maybe someone with a 2013 model could take the seat off an shoot some pictures- e-mail them to me???



Thanks Tom
 

·
Registered
Joined
·
7,369 Posts
Bump.
 
1 - 17 of 17 Posts
Top