TW200 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
I am working on restoring a 1996 Yamaha tw200 after its sat stored improperly for six years. Every thing appears to be in order other then what appeares to be a gas oil mixture entering the air box. I have disassembled the carb and cleaned it and do not belive it to be the culpret. My next move was to adjust the valve clearance but cannot find the right gap amount for the model year. I have only been able to locate manuals for models made after 2000. Can some one assist with telling me the proper gap clearance for the intake and exhaust valves on a '96? Thank you in advance.
 

·
Registered
Joined
·
2,223 Posts
Valve Clearance (Cold):



Intake: 0.05-0.09 mm (0.002-0.004 in.)

Exhaust: 0.11-0.15 mm (0.004-0.006 in.)
 

·
Registered
Joined
·
1,417 Posts
Pulled the side covers off my '07 last night... there was a sticker inside the left one that had engine specs.

Valve clearances, spark plug number & gap, etc.



Still have to get the manual out for the bolt torques.


 
1 - 4 of 4 Posts
Top