So I have had a very old, kick start tdub sitting in my folks barn for something like six years. Finally I am embarking on building it, and have stripped it down. I work at TechShop in Austin and have access to pretty much every tool you would ever want to build bikes (Waterjet Cutter, Tormach 3 axis cnc, Weldings shop, metal fab shop) and this is my first personal project to nock out in here. I really want to fit a reasonable for to it, and am consider a yz250 front end due to price and availabilty. I have yet to find someone who has done this, and am aware the fork is a good bit longer. I havent been able to find the exact dimensions, but am relatively sure I can make it work, with a custom machined axle and possibly jockeying the upper fork stanchions so they are above the triple tree. Any input would be incredibly apreciated, and I would be happy to help people out with any kind of custom fabrication projects they might need. I am also going to be fitting a flat slide 28mm carb and could use any tips regarding this.