TW200 Forum banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2022 HERE!
1 - 20 of 8672 Posts

· Registered
Joined
·
1,070 Posts
Cool. I bought my 2015 with 300kms on it, so about 80 miles more than yours.
Just bought a almost new 2015 yesterday. It only had 105 miles on it. Not one scratch on it. Guy bought it and put it in the garage. Got it for $3300. with a new battery. It has a 49 tooth sprocket on it. Needs a 42. Drained the fuel out of the carb, filled the tank and blasted around the area. Is it too soon to change the oil?
 

· Registered
Joined
·
1,070 Posts
New front and rear (w/ Rotopax mount) Manracks, and a Marmot Tungsten 2 P tent to strap to them.
 

Attachments

· Registered
Joined
·
1,070 Posts
Washed her up after the mud fests the last few days and put on a IMS 313114 shifter. Amazingly better shifting (better "feel") on the cold test ride. Who woulda thunk a piece of metal would make such a difference. Do it the same time you change foot pegs, would be my advice.
 

· Registered
Joined
·
1,070 Posts
Not “today” but some recent shenanigans

Not my edit or music choice on the vid linked below haha! I was the driver in the surf tow stunt, have taken my share of high speed tumbles so let the young guys have the fun ��

https://youtu.be/z2Cz67OyjaU

Gotta be the best bike all around ever. Handles deep sand like a tank! The road and trails in the canyon (Waimea) are worth alone a visit to Kauai and renting an enduro bike. If you do please hit me up would love to show you around and take you to some secret spots

Last shot was from an epic swell on the North Shore at a very fickle but very good break ��
LandCruisers and TWs are soulmates, I swear.
 

· Registered
Joined
·
1,070 Posts
Not much. Pressure washed. Adjusted the shift lever up one spline to fit my new boots better. Put some Nikwax on the boots. And rode!
 

· Registered
Joined
·
1,070 Posts
Away at work for the week, but still managed to buy some jets for the TW and the Super Sherpa from Partzilla. Looking to get rid of the horrible cold start on the SS.
 

· Registered
Joined
·
1,070 Posts
Put in the kick starter I had for months, heavy duty EBC clutch springs and adjusted the clutch. Fresh Yamalube and the clutch feels so, so, much better.

Neoprene gasket instead of pressed fibre was stock for the case cover in this 2015. I used it again as it was in perfect condition. Don't normally do that, but it really was pristine.

Harder to get the damn plastic off of the EBC clutch tool...

Oh yeah. The kick starter works just fine. Easy to kick over.
 

· Registered
Joined
·
1,070 Posts
What year is your bike. How was the install for the EBC clutch springs?
2015. Simple to do when you have the right side case cover off. 4 small bolts. All you need is an inch-lb torque wrench and a 9mm socket.

Adjusting the clutch I think helped quite a bit too.
 
  • Like
Reactions: tylermoney

· Registered
Joined
·
1,070 Posts
After a longish ride this morning I finally installed the e-bay Chinese shorty levers for clutch and brake. Really like the 2 clutch lever. Not so sure about the Non-adjustable brake lever. Should be nice for off road as I found the original levers too far away to 2 finger. Either way, now i have a set of spares. Grey chrome color matches the tank. :)

Started the bike every time today with the kick starter.
 

· Registered
Joined
·
1,070 Posts

Attachments

  • Like
Reactions: Apolloha

· Registered
Joined
·
1,070 Posts
Apolloha,
I know you asked for a link to what he was showing but, I thought I'd link you to the ones I just installed on my T-Dub. They fit flawlessly. The adjustability works outstanding. It took me only minutes to install them and, you can adjust them on the fly, it that's your plan. And, I think the looks are great too. Plus, they're a bit on the short side too which, lots of guys are leaning towards. See what you think.
Scott

https://www.amazon.com/gp/product/B07Q724P43/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
The problem I had after getting a pair just like these is that there is no adjustment screw on the brake lever. My brake light stayed on because the tab was way too long.
That's what is missing on the ones I installed as well. Although the brake light works fine.
 

· Registered
Joined
·
1,070 Posts
Got a smokin' good clearance deal on some Rev'It Sand 3 pants that (kind of) match my Sand 2 jacket. Thanks Dualsport Plus! Ready for Fall, Winter and Spring now. Downside is that I look like I should be riding a R1200GS...
 
  • Like
Reactions: 47382

· Registered
Joined
·
1,070 Posts
Finally got around to putting on the inevitable grocery getting milk crate, with the socially apropos Corona cooler insert. It just thumbscrew attaches to the Manracks rack, so I can easily de-dork it
204136


Looking more and more like a KLR everyday.
 
1 - 20 of 8672 Posts
Top