TW200 Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter #1
Anyone have any experience with the fit up of these on their TW? The small skinny side plates seem to cause an issue on the exhaust side when it comes to bag fitment.

E-12 Saddle Bags - Motorcycle Luggage by Wolfman | Wolfman Luggage

Yes, they're pricey, and I have tried less expensive bags, even tried the Rubbermaid tote which I always seemed to slam my back an butt into. These just seem like very good quality and not overly large for day trip riding.


Any info or pics. would be appreciated.

Thank you.
 

·
Registered
Joined
·
250 Posts
The following is a link to my page on the subject. They're very nice quality, and I highly recommend them. Be sure to figure out a way to keep them off of the muffler or they'll melt. I wrapped my muffler with exhaust header wrap which worked just fine. Also, I don't know if you have cycleracks or not, but you can see in my post how I solved the mounting problem with my Cycleracks. Without the rack the stock setup will work just fine.

http://tw200forum.com/forum/performance-customization/8530-wolfman-e-12-saddle-bags-2.html
 

·
Registered
Joined
·
30 Posts
Discussion Starter #3
The following is a link to my page on the subject. They're very nice quality, and I highly recommend them. Be sure to figure out a way to keep them off of the muffler or they'll melt. I wrapped my muffler with exhaust header wrap which worked just fine. Also, I don't know if you have cycleracks or not, but you can see in my post how I solved the mounting problem with my Cycleracks. Without the rack the stock setup will work just fine.

http://tw200forum.com/forum/performance-customization/8530-wolfman-e-12-saddle-bags-2.html



Awesome, thanks for the link. I even used the Search and could not find a thread specific for these.

Great info and photos, I appreciate it. The fit looks really nice.
 

·
Banned
Joined
·
4,030 Posts
1 - 6 of 6 Posts
Top