TW200 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
262 Posts
Discussion Starter #1
I have a 2001 that has the wrong lever on it, it scrapes the peg mount. Does anyone have a extra laying around or know what else fits it? The only one I have found is 79.99 on ebay.
 

·
Registered
Joined
·
5,957 Posts
You may just need a TW Kick Crank Boss - the splined part that bolts onto the kickstarter shaft. These are about $36.00 new. If your bike has the shaft and boss from an XT225 kit it may not extend out far enough from the TW brake lever and/or the footpeg mount. The picture below shows the TW boss on top and the XT225 boss on the bottom.

100_4500.JPG

The TW and XT225 kickstart lever also have slightly different curves as shown below, but I belive that the XT225 arm with a TW boss will work fine on the TW.

100_4502.JPG
 

·
Registered
Joined
·
262 Posts
Discussion Starter #4
That's it, I just need more offset. Thanks for pointing out I can get the part separate from the lever, I didn't even think about that.

So next question, you got one?

J/K Thanks
 

·
Registered
Joined
·
3,363 Posts
brian,
your knowledgable and comparative photos are always the best!
i'd be be willing to bet what collection of parts you'd have with an extra 1/4 acre and a few out buildings.... :)
 
1 - 5 of 5 Posts
Top